Bloomfield 9311 Especificaciones descargar pdf (Pagina 13)

CAUTION:

SHOCK HAZARD

Live electrical circuits are

exposed during this procedure.

Use care to avoid uninsulated

electrical connectors.

NOTE: Optimum brewing

temperature is 195ºF to 205ºF

(90ºC to 96ºC).

Thermostat should be adjusted

to a maximum temperature of

200ºF (95ºC).

IMPORTANT:

A mechanical thermostat will

maintain temperature within

±5ºF.

To prevent boiling water in

the brewer, controller should

be adjusted to a maximum

temperature equal to the local

boiling temperature minus 5ºF,

or 205ºF (97ºC), whichever is

less.

NOTE: 1/8 turn = approximately

10ºF (5.6ºC).

Fig. 10 Adjust Thermostat

TEMPERATURE ADJUSTMENT

Energize brewer and allow unit to heat. When the READY TO

BREW light rst glows, read the temperature.

Thermostat may be adjusted by removing the right button plug.

Carefully check the water temperature at the outlet of the brew

chamber. The temperature at this location is approximately 5º F

less than the actual brew temperature.

Adjust thermostat by turning shaft; clockwise increases

temperature. 1/8 turn = approximately 10ºF, or 5.6ºC.

Refer to Table 1 below for proper brewing temperature based on

altitude.

Upon completion, remove thermometer and reinstall the vent line

and top wrap.

Table 1 Boiling Temperature by Altitude

SERVICING INSTRUCTIONS

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Sin comentarios

Bloomfield 9311 Especificaciones Pagina 13