Bloomfield 2072 Instrucciones de operaciones descargar pdf (Pagina 11)

PROGRAMMING - ADVANCED (continued)

TIPS FOR NAVIGATING

IN THE PROGRAMMING

MODE:

1. Advance through all of the Menus and wraparound to the first

MENU again, by continually depressing the 1st key – BREW

(MENU).

2. To review Items in a specific Menu, press the 3rd key – ON/

OFF (ITEM) at the requested Menu to begin reviewing all or

some of the ITEMS in that MENU:

If you do not need to review the ITEMS in the MENU, press

the 1st key – BREW (MENU) to advance to the next MENU

or press the 2nd key – CANCEL (EXIT) to exit programming.

You must review/modify ITEMS in the sequence outlined in

the table within each MENU, by pressing the 3rd key – ON/

OFF (ITEM). If you need to go back to an ITEM, advance

through the menus by pressing the 1st key – BREW (MENU)

until you get back to the appropriate MENU, then press 3rd

key – ON/OFF (ITEM) to get to the required ITEM.

3. To Increase, Decrease, or Change settings when in the

programming mode press the 5th (“–“) or 6th (“+”) keys.

Suggestion: If the key is pressed and held, the changes to a

value will advance faster.

4. To change a value, such as brew temperature, navigate to

the Brew Temperature ITEM in the Brew Settings MENU.

Increase or decrease the setting using the 5th or 6th key.

Press the 3rd key – ON/OFF (ITEM) to commit the change

and advance to the next Item. To advance to the next MENU

press the 1st key – BREW (MENU), or exit programming by

pressing the 2nd key – CANCEL (EXIT).

5. To Exit Programming, you can press CANCEL (EXIT) at any

time. While in the programming mode, if no entries are made

for 2 minutes the E-Max will automatically exit programming.

6. To re-enter programming, ensure brewer is off, then press

and hold the 4th and 6th keys for 3 seconds, until “Brew

Settings” appears on the screen.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Sin comentarios

Bloomfield 2072 Instrucciones de operaciones Pagina 11