Bloomfield E-MAX Especificaciones Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
15
664 2M-Z18642 Owners Manual 2790 E-Max Dual Thermal Brewer
PROGRAMMING (continued)
Brew Volume
The 1st key is the Standard
Brew Volume. When a brew
volume other than standard
brew volume is selected, the
Brewer will complete that brew
then return to the standard brew
volume automatically.
7. Automatic Start-Up in Previous Mode:
If the brewer automatic timer is OFF (the factory setting) and
power is disconnected, the brewer will start up when power
is restored, in the mode it had been in prior to the power
disconnection. If the Satellite Brewer has the timer setting
ON and power is disconnected, the brewer will start up
in the mode that it should be in at the time the power
is restored.
8. Brew Volume:
The Brewer can have up to 3 different brew volumes on each
side. When a volume other than the standard, or rst brew
volume, is selected, the brewer will complete that volume
and then automatically reset to the standard, or rst brew
volume.
To view, press the individual volume key. The brew volume
will be displayed on the screen for 3 seconds. If there is
no brew volume for a specic key, the screen will read “no
volume prog”, (i.e. no volume programmed).
9. Clock
Time – Battery Backup. The brewer has a battery backup
system which will maintain the proper time during power
failures, or when the brewer is unplugged (even for very
prolonged periods of time). Normally there will not be a
need to set the time except for Daylight Saving Time
changes, or moving the brewer to different time zones.
10. Changing Day and Time: To change time, in the OFF
mode, press the 2nd key twice followed by the 1st key twice
to access the time change mode. In the time change mode
the screen will read “Day:” followed by the current day
setting. Use the 6th key to advance the day, or the 5th key
to reverse.
When day has been properly set, press the 3rd key. The
screen will now read “Time:” with the set time on the screen,
the hour and am or pm ashing. Use the 6th key to advance
the hour, or the 5th key to reverse, making sure that the am
or pm is correct.
When the hour and am/pm is correctly set, press the 3rd key,
and the screen will read “Time:” with the set time on the
screen, minutes ashing. As previously, use the 5th or 6th
keys to adjust the minutes, and press the 3rd key when
complete. The Brewer will return to the off mode. (Changing
time can also be done in the regular programming mode.)
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comentarios a estos manuales

Sin comentarios